Dione
DIONE
Autonomous siren with blue or red LED Flash.
Security and aesthetics with technological superiority
DIONE
Autonomous siren with LED Flash with an acoustic power of 122dB at 1m. It has a Polycarbonate box and an inner cover made of galvanized sheet metal, Tamper on the lid and the base, pre-alarm function/test mode with input for visual or audible indication of the state of the alarm-alarm output in case of siren violation and alarm output for low voltage or battery damage.
DIONE
Safety and Technological excellence in an ideal combination
The DIONE series is an ideal combination of safety and technological excellence. It is specially configured for easy identification of the area from which the alarm originates. Its elegant design and technological superiority place it at the top. It has the highest degree of certification since it now meets the strictest security specifications (Grade 3). It is an ideal product of Sigma Security which guarantees maximum security in the user’s protected space, offering a comprehensive service in the field of Security Systems. It was designed by a team of Greek engineers and is produced entirely in Greece. Like all the Sigma Security products, it is covered by a warranty of up to 2 years.
- Built in spirit level
- Alarm input (+Trigger-)
- Tamper output
- Protection against opening the lid
- Protection against detachment from the wall
- Cut or short circuit alarm trigger cable or power supply or both
- Reverse battery protection
- Fault/low battery output
- Internal metal protection cap
- Pre-alarm function
- Wireless
- Including TRX trenceiver to be compatible with all manufactureres panels
- Built in spirit level
- Protection against opening the lid
- Protection against detachment from the wall
- Battery control circuit
- Internal metal protection cap
- Pre-alarm function
| Power supply | 13.2-14.5 V DC |
|---|---|
| Operating voltage | 13.8 V DC |
| Quiescent consumption | 8 mA (when first powered by battery only and not powered by panel) |
| Standby consumption | 13.0 mA when the LEDs light up in standby |
| Standby consumption | 9.5 mA when the LEDs do not light up in standby |
| Alarm consumption | 1.2 A max sound only, 1.35 A max with FLASH |
| LED FLASH consumption | 150 mA max |
| Low battery voltage output | When the battery voltage is less than 11.5 V DC |
| Triggered by Trigger IN | Balances with permanent 12V DC at the input. Gives an alarm when the voltage is interrupted (or when the voltage at the input is <5.8 V DC)) |
| Activation by Trigger - IN | Balances when the input is connected to its – |
| Operating frequency | 900-2700 Hz |
| Acoustic Power | 122db at 1m |
| Maximum alarm duration | 15 minutes |
| Protection switch (ΤΑΜΡΕR) | On the lid and on the wall |
| TAMPER switch contact (NC-NO) | 600mA |