DIONE W/R

Wireless outdoor siren, white with red flash

The DIONE W is a wireless outdoor siren for S PRO control panels. No cable needs to run to the façade: it has its own 14 Ah lithium battery and talks to the control panel via the SXP 48 wireless receiver.

Volume
108 dB
Colour
White
Flash colour
Red
Siren type
Piezoelectric
Available versions
Compatible with: S PRO

Product code: 5079003

Brochure and instructions in PDF (1)

No wires

Ideal when there is no conduit from the control panel to where the siren goes.

Battery alert

When the battery gets low, you see it on the alarm keypad.

Tamper protection

If someone opens it or pulls it off the wall, the siren and the control panel both sound.

Features

  • Wireless self-powered, self-protected siren with red LED flash.
  • Works with SPRO series control panels via the SXP 48 wireless expander
  • Power supply: lithium-thionyl chloride battery (Li-SOCl2).
  • Battery type: ER 34615M / 3.6 V DC / 14,000mAh (14 Ah).
  • Operating voltage: 2.8-3.6 V DC.
  • Standby consumption: 8 mA.
  • Alarm consumption: 600 mA including the FLASH.
  • LED FLASH consumption: 100 mA max.
  • Low battery output: when the battery voltage is below 2.6 V under load or 3.2 V at rest.
  • Operating frequency: 900-2700 Hz.
  • Sound output: 108 dB at 1 m.
  • Maximum alarm duration: 3 minutes.
  • Tamper switch (TAMPER): on the cover and on the wall.
  • TAMPER switch contact (NC-NO): 600mA / 125 V DC.
  • TAMPER alarm duration: 45 seconds.
  • Protection rating: IP 44.
  • Siren and flash housing material: polycarbonate.
  • Weight (without battery): 1,280 g.
  • Dimensions: 190 x 290 x 65 mm (W x H x D).

Technical data

Sound output108 dB
Foam and vibration detectorNo
Wireless sirenYes
HousingPolycarbonate
Bus connectionNo
Speaker typePiezoelectric
ColourWhite
Flash colourRed
Code5079003

Downloads

Got questions? See the FAQ or how to use your alarm.
Are you an installer? You'll find all the brochures, manuals and programming videos in the professionals section.