IRIS FSD/B
Grade 4 outdoor siren, white with blue flash
The IRIS FSD is our most heavily armoured siren, with Grade 4 certification. On top of everything the IRIS BASIC does, it detects if someone tries to fill it with foam, hit it, drill it or change its tilt, and sounds straight away.
- Certification
- Grade 4
- Volume
- 122 dB
- Colour
- White
- Flash colour
- Blue
Available versions
Compatible with all alarm control panels
Product code: 5041012
Foam detector
Two infrared sensors detect an attempt to block it with foam.
3-axis sensor
Sounds on impact, drilling or tilting by more than 45°.
Fire input
A distinct sound for fire, so you know right away what's happening.
Features
- Self-powered GRADE 4 siren with blue LED flash.
- Sound output 122dB at 1m.
- Battery short-circuit protection.
- Negative or positive trigger input.
- The siren can be fully installed without power from the control panel and left that way for quite some time.
- Fire input with a different sound.
- Alarm input with five different sounds, triggered by application or removal of positive or negative voltage.
- Option for a low-volume sound when the siren starts, which then rises to the normal level.
- The siren can be limited to 5 alarms in 24 hours.
- Built-in 3-axis accelerometer that triggers the siren in case of vandalism or drilling, and when its tilt changes by more than 45°.
- Foam detector, to stop the siren being disabled with foam.
- TAMPER protection against opening of the outer housing or removal of the siren from the wall.
- Built-in FLASH with five high-brightness, low-consumption LEDs, with short-circuit protection.
- Seven different FLASH modes in stand-by.
- The FLASH keeps working for thirty minutes after the alarm ends, so you can easily find the area that triggered it.
- LOW BATTERY output, activated when the battery voltage or the siren supply voltage drops below 11.5 V.
- ALARM VERIFICATION output, activated every time the sounder sounds, whatever the reason.
- ALARM TAMPER output, activated on every tampering attempt.
- SIGNAL input, with selectable visual or audible confirmation of control panel arming or disarming.
- The battery can be changed and the siren serviced without it sounding, thanks to a very clever automated procedure.
- Housing with a 4 mm thick polycarbonate outer casing.
- Metal inner cover inside the siren for extra security.
- All programming is done with buttons on the siren's circuit board.
- Takes a 12V/2.3Ah battery.
- Dimensions: 348 x 246 x 69 mm.
Technical data
| Sound output | 122 dB |
|---|---|
| Foam and vibration detector | Yes |
| Chrome-plated cover | No |
| Housing | Polycarbonate |
| Bus connection | No |
| Speaker type | Magnetodynamic |
| Colour | White |
| Flash colour | Blue |
| Code | 5041012 |
Downloads
- BrochureIRIS brochurePDF, 818 KB · in Greek
- Installation instructionsInstallation instructions IRIS and IRIS FSDPDF, 396 KB · in Greek
- CertificateGrade 4 certificate (IRIS FSD)PDF, 1,7 MB · in Greek
- Declaration of conformityIRIS declaration of conformityPDF, 118 KB · in Greek
Got questions? See the FAQ or how to use your alarm.
Are you an installer? You'll find all the brochures, manuals and programming videos in the professionals section.
