SMC 502/B

Features

• The SMC 502W is a fully supervised, two-way wireless magnetic contact that works exclusively with the SXP-48 receiver.
• It has two reed switches, with automatic selection of the reed switch to use, and is used to protect doors or windows.
• It also has a terminal block with two N.C. zone inputs, which can be used to connect wired magnetic contacts, water leak sensors or low-consumption motion detectors.
• The combinations you can create with the SMC 502W and its two inputs are:
• • 1 wireless magnetic contact
• • 1 wireless magnetic contact + 2 wired magnetic contacts
• • 1 wireless magnetic contact + 2 wired flood detectors
• • 1 wireless magnetic contact + 1 wired magnetic contact + 1 wired flood detector
• Technical specifications
• Transmission frequency: 868 MHz.
• Signal modulation: GFSK.
• Communication: two-way.
• Activation: two reed switches.
• Inputs: 2 N.C. inputs for connecting wired magnetic contacts, water leak sensors or motion detectors.
• Tamper: Protection against opening the contact cover and, optionally, against removing it from the wall.
• Battery: 3.6 V / 2,500 mAh, Lithium – Thionyl Chloride [Li-SOCl2], AA size (battery included).
• Battery life: 5 years with normal use.
• Low battery voltage check: when the battery voltage drops below 2.8 V.
• Operating temperature: 0 °C to 50 °C.
• Dimensions: 86 x 31 x 24 mm (contact), 48 x 9 x 9 mm (magnet).
• Weight: contact 35 g, magnet 6.3 g, battery 20 g.

Technical data

Downloads

• Installation instructionsInstallation instructions SMC 502PDF, 608 KB · in Greek