WILINK
Communication with the ARC over Wi-Fi
Product code: 5034003
Features
- WiLink is the best solution for connecting the alarm system to the Alarm Receiving Centre over the internet.
- Alarm signals are sent instantly, with no extra subscription for the end user.
- It also connects to the router wirelessly over WiFi, with no cabling needed.
- WiLink connects to the telephone line input of any alarm control panel, replacing the telephone connection with the Internet.
- It can decode all Contact ID signals it receives through the alarm control panel's telephone line input and send them to two Alarm Receiving Centres over the internet, using the SIA DC-09 protocol.
- It supports two IP addresses per ARC, and AES 128 encryption can be used for secure data transmission.
- For extra security, the communication status is checked continuously, with adjustable polling from 5 to 255 minutes.
- The device is very easy to configure via an app for devices running
- Android and iOS, which guides you step by step until programming is complete.
- Automatic over-the-air firmware update
- When a new firmware update is released, WiLink downloads and installs it automatically, with no need for the installer or user to step in. The update takes a few seconds. The update file is smaller than 1MB and is encrypted. The download runs in the background without affecting how WiLink works.
- Features
- Wireless connection via WiFi
- Automatic over-the-air firmware update
- Easy programming via app (Android and iOS)
- Compatible with all alarm control panels from any manufacturer
- Ademco Contact ID to SIA DC-09 communication protocol
- Automatic network configuration (DHCP)
- Can communicate with two independent Receiving Centres
- Encrypted communication option (AES-128)
- Made in Greece Supply voltage: 11-14 VDC
- Consumption: 62 mA standby, 400 mA in operation
- PSTN line fault check time: 5 sec
- Telephone line emulation voltage: 47V
- Loop current: 25 mA
- Dial tone frequency: 425 Hz
- Dialling mode: tone Dimensions: 115x75x20mm
- Weight: 171 g CAUTION: The WiLink device must not be installed inside the control panel's metal box or mounted on or near any metal surface.
Technical data
| Code | 5034003 |
|---|
Downloads
Got questions? See the FAQ or how to use your alarm.
Are you an installer? You'll find all the brochures, manuals and programming videos in the professionals section.
